Create 3D views, floor plans, sections, elevations, and RCPs

Last updated: October 20, 2026

Generate the views you need to design and document your project: 3D views, a floor plan and reflected ceiling plan for every level, and sections and elevations. Views are live. When the model changes, every view updates with it.


Where views live

Views are listed in the left panel. Click + next to Views to create a new one. Every model also has a default 3D view, which is where you land when you open it.

💡 Anything you add to the model shows up in every view. Content in your views can be controlled but the visibility overrides in the properties panel. Some things, like detail lines, text, and dimensions, can be added to a single view only, so your plan notes don't clutter your 3D views. See 📄 Model elements vs. view annotationsfor full details.


Create a 3D view of one floor

  1. Open the floor plan for the level you want, for example Level 2.

  2. Click the Views tool and add a 3D view.

The new 3D view is cut to show just that floor. Orbit to look around it.

To create a 3D view of the whole model instead, add a 3D view from the default 3D view.


Create floor plans for every level

You can create floor plans for several levels at once. First, you'll need to create your levels ​

  1. Click the Views tool in the left toolbar.

  2. Click Add Floor Plan.

  3. Check each level you want a floor plan for.

  4. Click Add to create them.

One floor plan is created for each level you checked.

âš  If a level already has a floor plan, checking it again creates a duplicate.

If your building is a linked model

Floor plans come from the levels in your own model. If the building is linked in from another model, its levels belong to that model, so they won't appear in the Add Floor Plan list.

To get floor plans of a linked building, first create matching levels in your model:

  • Ask the agent, for example "Create levels in this model to match the levels in the linked model."

  • Or create them yourself. Add a level for each floor and set its elevation to match.

Then use Add Floor Plan as above.

âš  You'll see both sets of levels, yours and the linked model's, in your views. You can't hide only the linked model's levels yet.

💡 Working directly in a Revit-published model? Its levels are already part of that model, so they show up in Add Floor Plan right away. A Revit level comes across if it has rooms on it.


Create a section

A section takes three clicks: start, end, then how far it looks.

  1. Open a floor plan, or an existing section from the Views section of the left side panel.

  2. Click + and choose Add Section View.

  3. Click to set the start and end of the section line. Hold Shift to keep it orthogonal.

  4. Set the depth and direction, which is how far beyond the section line the view looks and which is the side of the line you're looking toward.

  5. Select the section's crop boundary and drag it in to show only what you need.

💡 Where to cut: a typical set includes a cross-section and a longitudinal section through the whole building, plus sections through areas that need explaining, like a stair.


Create an elevation

Elevations are created the same way as sections. They can be exterior, like a building facade, or interior, like one wall of a room.

  1. Open a floor plan from the Views section of the left side panel.

  2. Click + Click + and choose Add Elevation View.

  3. Click to set the start of the elevation line. Hold Shift to keep it orthogonal.

  4. Click to set the end. The line sets how wide the elevation is.

  5. Set the depth and direction, which is how far beyond the section line the view looks and which is the side of the line you're looking toward.

  6. Select the elevation's crop boundary and drag it in to show only what you need.


Create reflected ceiling plans

A reflected ceiling plan (RCP) looks up at the ceiling from a level, as if the ceiling were reflected in a mirror on the floor. Use it to lay out ceiling heights, lighting, and anything else overhead.

  1. Click + next to Views.

  2. Choose Reflected Ceiling Plan.

  3. Pick a single level, or All levels for a large project.

The RCP appears in the view list, grouped with your other views by type. Like floor plans, RCPs are created from levels in your own model.

Adjust what the RCP shows

An RCP's view range works upward from its cut plane:

  • Cut plane: usually set just above door and window heads, so openings don't clutter the ceiling plan.

  • View depth: measured up from the cut plane. Raise it to pick up ceilings and fixtures higher in the space.

Set both in the view's Properties.

💡 Something from the floor below showing up in your RCP? Raise the cut plane until it sits above it.


Move between views with tags

Section and elevation tags appear in every view that crosses their cut location, so your plans show where each section and elevation was taken.

  • Double-click a tag to open the section or elevation it refers to.

âš  If a tag disappears from a plan, check the section or elevation's crop. A tag only shows in views its crop region crosses.


Set a view's scale

Each view has its own scale, for example 1/8" = 1'-0" for a full building section or 1/2" = 1'-0" for a wall section. Set it in the view's Properties. The scale controls how big the view appears when you place it on a sheet.


Hide categories in a view

  1. Open the view and make sure nothing is selected.

  2. In the Properties panel, open Visibility overrides.

  3. Turn off the categories you don't want to see, for example Levels.

Visibility is set per view.


Or ask the agent

Motif's AI agents can set up views for you, which is handy when you need a lot of them. For example:

  • "Create a floor plan, an RCP, and a 3D view for every level."

  • "Create north, south, east, and west exterior elevations."

  • "Create an interior elevation of each wall in the conference room."

Review what the agent creates, then adjust the crop, depth, and scale as you would for any view.


Good to know

  • Duplicating a view doesn't copy its annotations. Text, dimensions, and detail lines stay with the original view.

  • Callouts aren't supported yet.


Need help? Reach out to us at community.motif.io